Viola Systems 2270 Especificações descarregar pdf (Página 29)

29 / 80

• Figure 31: M2M GW, network interfaces screen

3. As you are now connected to M2M GW via eth0

, which is the future WAN port, it is

recommended first to change the eth1

, the LAN port. In this example, the IP addresses are

set as defined in page 11, chapter 7.1: Scenario 1, M2M GW connected with public IP

address.

4. Click the “eth1” text to configure the eth1 interface’s settings as in Figure 32.

• Figure 32: Configuring eth1 interface in M2M GW

5. In the “Edit Bootup Interface” screen of eth1, set the interface’s attributes as follows

(As in Figure 33.):

Name: eth1

Netmask: 255.255.255.0

MTU: Automatic

IP Address: 192.168.0.1, static

Broadcast: 192.168.0.255

Activate at boot: Yes

Enable proxy ARP: No

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 79 80

Sem comentários

Viola Systems 2270 Especificações Página 29